The Experimental Approach to Effective Stress Law of Coal Mass by Effect of Methane

Effective stress law of all kinds of coal samples, including steam coal, fat coal, corking coal, thin coal and anthracite, under pore pressure of gas, is experimentally studied using a newly developed test machine. These samples are taken from Coal Mines in Wuda, Hebi, Yanzhou, Yangquan, Qingshui, and Gujiao in China. The experiment results show that, under pore pressure of gas, the tested coal samples comply with Biots effective stress law, where the Biots coefficient is not a constant, and is bilinear function of volumetric stress () and pore pressure (p), that is, We define four areas according to the numerical feature of , that is, functionless area of pore pressure, normal function area, fracturing function area, and quasi-soil function area. The effective stress law of coal mass introduced by this paper is a constitutive equation in the study of coupled solid and fluid. This has significance in the drainage and outburst of methane in coal seam.     

Effects of dry density and thickness of sandy soil on impact response due to rockfall

Sand cushions against impact force are widely used for rockfall prevention covers. The objective of this paper is to investigate the effects of the dry density and thickness of a sand cushion on an impact response due to a falling weight likened to a rockfall. A series of laboratory experiments for a decomposed granite soil was executed in the combination of the mass and drop height of the weight. As a result, the impact pressure applied to the soil surface increases with the dry density, but it does not depend on the thickness of the soil. The earth pressure at the bottom of the mold increases with the dry density, and it decreases with the thickness of the soil. Therefore, the transmissibility of the impact pressure decreases rapidly with the thickness of the soil.     

有限元法在三轴转台机械系统设计中的应用

本文探讨了三轴转台机械系统的设计与计算问题，以惯性三轴测试转台和三轴模拟台为例，确定了多种运转状态下的有限元法计算模型，并对其进行了静、动态特性计算，比较分析了计算结果，为合理结构的设计提供了重要数据，说明了在三轴转台机械系统设计中有限元法的重要性     

新疆下坂地水库坝基防渗墙试验研究

新疆下坂地水利枢纽工程地处高寒、高海拔的山区,坝基覆盖层厚度达147.95m,透水性强,易坍塌和漏浆,块石坚硬,坝基防渗处理难度罕见。针对这一工程问题进行了坝基防渗墙试验研究,结果表明,以大深度混凝土防渗墙为主墙,下接帷幕灌浆的墙幕结合方案。本文针对新疆下坂地深厚覆盖层坝基防渗墙进行了试验研究,找出了防渗墙有效的施工深度及合理的施工方法,从而为坝基防渗墙设计施工提供了可靠的依据。     

一种铈（Ⅲ）配合物对含石墨粘结涂层耐蚀性的影响

为了改善含石墨粘结涂层的耐蚀性，首先对这种涂层在腐蚀环境中耐蚀性差的原因进行了分析，然后将二正丁基磷酸、ＣｅＦ＿３、Ｓｂ＿２Ｏ＿３和一种Ｃｅ（Ⅲ）配合物Ｃｅ（ＮＯ＿３）（Ｃ＿８Ｈ＿（１８）ＰＯ＿４）＿２分别添加于酚醛环氧－ＭｏＳ＿２－石墨粘结涂层中，考察了它们对这种涂层耐蚀性的影响，并对含Ｃｅ（ＮＯ＿３）（Ｃ＿８Ｈ＿（１８）ＰＯ＿４）＿２的涂层和空白样涂层进行了表面分析。盐雾试验表明，添加Ｃｅ（ＮＯ＿３）（Ｃ＿８Ｈ＿（１８）ＰＯ＿４）＿２可以有效地抑制涂层中ＭｏＳ＿２的氧化和由石墨所引起的金属底材之电化学腐蚀；根据Ｘ射线光电子能谱分析结果可知，添加Ｃｅ（ＮＯ＿３）（Ｃ＿８Ｈ＿（１８）ＰＯ＿４）＿２之所以能够提高含石墨粘结涂层的耐蚀性，应当归因于它在ＭｏＳ＿２晶体表面和金属底材表面的吸附。因此，Ｃｅ（Ⅲ）配合物Ｃｅ（ＮＯ＿３）（Ｃ＿８Ｈ＿（１８）ＰＯ＿４）＿２是含石墨粘结涂层的一种实用性能良好的新型防腐添加剂。     

深部土高压卸载变形结构性量化参数确定及本构模型

用取自山东巨野矿区埋深300～600m的深部粘土样,在三轴伺服仪上进行原状和重塑土的高压三轴卸载试验,对比分析其变形特点;提出一种描述深部土高压卸载变形与强度连续变化的土结构性参数的方法,并根据三轴卸载试验结果,确定了巨野矿区深部土高压卸载变形结构性参数,建立了描述巨野矿区深部土高压卸载结构性本构模型。     

大空间三向组合平板网架研究

利用中心节点、交叉梁、三角形拉杆和空心板所构成承力单元的组合以及内部支承柱的自由布置,本文提出了一种新型大空间三向组合平板网架结构。相关的TDGS分析系统针对原型试验取得了较好的模拟效果。通过引入柱的局部影响区域这一全新概念,系统总结了加入内部支承柱前后网架结构的内力和变形规律,进而为进一步的工程应用提供了可行性建议。     

新型皮肤摩擦特性测量装置的实验研究

研制出新型皮肤摩擦特性测量装置并用于测量人及动物体内、外皮肤的摩擦特性,在不同试验参数下测定了皮肤与假肢接受腔材料之间的摩擦系数.结果表明:该装置法向加载精度高达99.59%;在相同试验条件下测得猪体外皮肤摩擦系数的重复性较好;在人体上、下肢不同部位,只有手掌部位皮肤与其它部位的摩擦系数有显著性差异(P＜0.005);在控制法向载荷和往复移动频率2种模式下得到兔体内皮肤摩擦系数的试验结果具有可比性,摩擦系数随着法向载荷的增加而降低,随着往复移动频率的增加而增大;用该装置摩擦前后其皮肤组织结构有明显变化.     

Mathematical Modeling and Parameter Identification of a Planar Servo-Pneumatic Test Facility. Part I: Mathematical Modeling and Computer Simulation

High quality multi-axis test facilities used for testing heavy loads and large structures of industrial equipment are usually simulated, designed and controlled based on reduced model equations neglecting the inertia properties of the actuators. The design and control of servo-pneumatic test facilities used for testing small and light structures must take into account extended test facility models including the various inertia properties of the actuators. In this paper (Part I) an extended test facility model is presented including the various inertia properties and joints of the actuators. These extended model equations are represented in a form well suited to be directly implemented in control algorithms based on exact linearization techniques for real time control. This is done by stepwise projecting the inertia properties of the various actuator housings and actuator pistons down to the common mass of the test table and payload. The resulting extended model equations have the same form as the reduced model equations. They only include more complex system matrices and vector functions. These compact model equations turn out to be suitable for an efficient nonlinear controller design of these test facilities. Computer simulations and associated laboratory experiments show the necessity to use extended model equations in case of testing small and light structures. In Part II of this paper [1] the inertia parameters of the planar test facility will be identified in laboratory experiments.     

随机疲劳试验前Instron2165电液疲劳试验系统的分析

本文介绍了随机疲劳试验之前我们对Ｉｎｓｔｒｏｎ计算机控制２１６５电液疲劳试验系统做的分析方法与过程．